Comment
Author: Admin | 2025-04-28
RTX 3060s. They are both LHR, but the v1 is more easily bypassed/better for mining ETH and ERGO. The v2 is “more LHR”, if you will…In windows you can run GPU-Z and see what device ID you have. ID 2503 = v1 whereas 2504 = v2. In hiveOS (or other linux) you can tell by the driver version. not.checked’s GPU that runs 41 to 44 MHs is a v1 GPU because they are able to boot their HiveOS rig with Nvidia driver version 460.39. If your GPU was v2 your rig would most likely not boot, if it did boot it wouldn’t recognize the GPU and it would show something like “Device ID 2504 not recognized”. So, the 41-44 MHs, while great for V1 (I’m only getting 39 to 40), isn’t yet possible on v2 RTX 3060s, at least not in all the research I’ve done. I am very hopeful/confident that the miner developers will crack this code and we’ll get better hash rates from the v2 3060s. Thanks for your information! Any advance / recommendation for the 3060 v2?lolminer 1.34, someone tried it and with what oc? BWideas October 22, 2021, 3:04am #13 I have switched my RTX 3060v2 cards to T-rex version 0.24.2 and I am getting 33.5 MHs on average. You have to add this command to the miner’s user config section: “lhr-tune”: “71”. You can change the 71 to 72, but it may not be as stable as 71. I just switched this rig over to T-rex tonight and all is good after an hour. I will check it again tomorrow morning and consider switching to “lhr-tune”: “72” tomorrow.My current config is following:-Miner: T-rex v0.24.2-Algo: ETH (DaggerHashimoto)-OC: Core -502, Mem 2600, PL 115w (GPUs are pulling 114 to 115w)-Perf: 33.5MH/s-Temps: 62 to 64 C (This rig is tight with very little room between GPUs. When I move these to an open air rig, I expect this to drop to 59 to 62 C).-Fans: Auto (55% to 64%)-Driver:460.91.03-Pool: HiveON I’m getting 33.5 mh on ETH mining on each card with the following settings:nbminer latest vercore: 1500mem: 2350pl: 120 (max power used for each card between 65W and 105W)fan: 70%temps: 48C to 52Cdriver: 470.74pool: HiveOnextra argument on miner: “lhr”: “69” (no lock detected) … if changed the value to 70, lots of lhr lock detections.In 3 weeks of mining, 0.1 ETH mined.Setup is 6 x Zotac RTX 3060
Add Comment